Truss Decking Panel Production Line

This production line consists of steel trussproduction line, spot welding machine for deckingpanel, roll former, hydraulic system, electrical control system, etc. Ourcompany provides all-dimensional technical service since the beginning of theproject to the end product.

Technical Parameter:

Diameter of Uppe rChord Rebar: 6,12mm

Diameter of Lower Chord Rebar: 5~12mm

Diameter of Web MemberRebar: 4~6.5mm

The Heightbetween Upper Chord and Lower Chord: H=70~270mm

The Heightbetween Lower Chord and Bottom:

Bending Feet Truss:C=15,30mm

Non-bending Feet Truss:F=0,30mm

Bottom Width: Bending Feet Truss:A=135~140mm

                          Non-bending Feet Truss:D=60, 80mm

Bending Feet Width:B=30mm

The Pitch of Web Member Bending: T=200mm

Truss Length:2~12m

Production Line Speed:    Bending Feet Truss: 15m/min

                                               Non-bending Feed Truss:20m/min

Welding Speed of SpotWelding Machine: 6m/min

Compressed Air: NotLess than 0.7MPa

Capacity of MainPSA Container: Not Less than 400KVA

Layout drawing：

Product sample：